Advertisement
POWER SOURCE
Power to the unit is supplied by the subrack. Please refer to the SR-20D and PSR-2 instructions
for further details.
POWER CONNECTION
Power is supplied to the unit via a four finger backplane connector. The RT-940CD-SL can be
inserted into the subrack or removed from the subrack with power applied to the backplane.
FIBER CONNECTION
The fiber optic connection is made via a FC/PC connector located on the back of the unit. Be
sure to allow sufficient room for the required minimum bend radius of the fiber cable used.
VIDEO INPUT CONNECTIONS
The video input connections are made via BNC connectors on the right side of the unit. The
video input should be connected to an appropriate 75 baseband video source such as a
camera or a video recorder output. For optimum performance the video cables should be the
shortest length of coax practical.
RT-940CD-SL STATUS INDICATORS
The RT-940CD-SL transmitter provides the following LED status indicators described on the
next page to aid in installation and troubleshooting:
3
Advertisement
