Connecting To A Wired Network - Sony HT-CT790 Operating Instructions Manual

3
Fasten the screws in the wall.
The screw should protrude as
illustration.
3.5 mm to
4.5 mm
4
Hang the holes of the mounting
bracket on the screws.
Align the holes at of the mounting
bracket with the screws, then hang
the unit on the two screws.
Connecting to a Wired
Network
730 mm
Prepare the network by connecting the
system and PC to your home network
with a LAN cable.
The following illustration is the example
for connection of the system and PC to
your home network.
The server needs to be connected to the
same network as that of the system.
Tip
We recommend that you use a shielded
straight interface cable (not supplied).
Connecting to a PC or Router
with a LAN Cable
LAN cable
(not supplied)
Note
Internet
Modem
Router
Server
17
GB