Replacing Smart Sensor Battery - Suunto AMBIT3 RUN 1.0 User Manual

20.9
16:30
Tuesday
Charge the battery by attaching it to your computer with the
supplied USB cable, or charge with a USB-compatible wall charger.
It takes approximately 2-3 hours to fully charge an empty battery.
TIP: Go to Movescount to change the GPS fix interval of your
sport modes to save battery life. For more information, see
3.19.3 GPS accuracy and power saving.

4.4 Replacing Smart Sensor battery

The Suunto Smart Sensor uses a 3-Volt lithium cell (CR 2025).
To replace the battery:
1. Remove the sensor from the belt strap.
2. Open the battery cover with a coin.
3. Replace the battery.
4. Firmly close the battery cover.
100%
< 10%
76-100%
30sec
51-75%
26-50%
< 2%
0-25%
87