6. XC-540MT : Installing the Ink Cartridges
1.
Switch on the power and make the initial settings.
v
MENU LANGUAGE
ENGLISH
w
LENGTH UNIT
mm
x
TEMP. UNIT
C
2.
Clean the print heads with the SOL INK cleaning cartridges.
SELECT INK TYPE
E-SOL Max LcLm
White/Metallic Silver Mode
White Mode
v
INSTALL
DRAIN BOTTLE
w
SET SOL-CL LIQUID
2 3
FILLING INK...
>>
42
Hold down
Use
Press
Use
mm
want (for length).
Press
Use
C
want (for temperature).
Press
Make sure the selected ink mode is enabled.
If an incorrect ink mode is enabled, switch off the sub
power.
Again carry out the procedure on page 40, "Selecting the Ink
Mode."
If the selected ink mode is enabled, press
Make sure the drain bottle is installed.
Press
Insert cleaning cartridges into slots 2, 3, 8, and 9.
8 9
and press the sub power switch.
to select the language you want.
.
to select the unit of measurement you
.
to select the unit of measurement you
.
.
.