Roland XC-540 Setup Manual page 28

3. Assembling and Installing
5.
Attach the paper tube.

Pull the dancer roller back toward you.
v Mount the paper tube and secure the arm in place.
First, fit the paper tube securely onto the end cap on the same side as the right stand leg. Next, press
the end cap on the same side as the arm into the paper tube and securely fit the end cap into the paper
tube. Finally, secure the arm in place using the arm retaining screw.
Tighten the screw while
pressing down from above.
Arm
Fit onto this securely.
For the paper tube, use the included item. Using something other than the included item may result in
spinning without traction or other problems that impede media take-up.
26
Dancer roller
OK
End cap
Not
OK
Paper tube
End cap
Fit onto this securely.
Paper tube