Sinclair QL User Manual page 4

PLEASE READ THIS BEFORE UNPACKING THESE PAGES
Your QL User Guide is supplied unbound, to avoid damage in transit and to make rapid
updating easy. In addition to this packet containing the pages of the Guide itself, you
should also find a ring binder and then divider cards packed with your QL.
Insert the dividers into the binder first. The recommended order is as follows:
This will put the divider tabs in a logical order. If you wish, you may put the sections in a
different order, perhaps to put often used sections near the front, or even miss out sections
you do not expect to use.
Now look through the pages to identify the various sections, each begins with a title page
with the Sinclair logo at the top. The pages within each section will be packed in the correct
order, so be careful not to mix them up, the individual sections, however may be in a
different order to that shown above if a section or sections have recently been reprinted.
Once each section is placed in the binder as you like it, this sheet may be discarded, it
does not form part of the Guide.
Position
Front
Back
Tab Label
Introduction
Beginners Guide
Keywords
Concepts
QL Quill
QL Abacus
QL Archive
QL Easel
Information