Remote Installation - Dvico FusionHDTV 5 GOLD User Manual

3.4

Remote Installation

* Remote transceiver is optional and can be purchased separately through FusionHDTV dealers.
* Remote transceiver is Basic option for Plus Version.
1) Connect the IR receiver module to the PC's
USB port.
2) After IR receiver and FusionHDTV remote
software is installed, please reboot and start
the configuration
FusionRemote icon at the low right bottom of
the screen.
FusionRemote icon in the tray, please start
the program by Start->Program->DViCO-
>FusionRemote.
3) Please select the port that IR receiver module is attached and press the any button on the remote
transceiver. A Dialog box
with the remote transceiver
buttons will appear.
Tip FusonRemote program will
start automatically when the PC is
booted. You can
FusionRemote program availability
at the Task Bar of Windows like the
picture below.
All specifications and information are subject to changes without further notices
by right cliking
If you do not see
check the
the
the
28