Driver Installation Under Windows Me - Dvico FusionHDTV 5 GOLD User Manual

2.2

Driver installation under Windows ME

2.2.1 Before Installation
Make sure to install the software in the following order.
1) Install the Application software (refer to 2.1 Installing FusionHDTV Applications)
2) Install Hardware(Board) (refer to 3.3 Board Installation)
3) Install Windows ME Driver (refer to 2.2.2 Installing Windows ME driver)
4) Check Windows ME device manger (refer to 2.2.3 Checking Windows ME Driver)
2.2.2 Installing the Windows ME driver
1) Insert the FusionHDTV board into the PCI local bus slot. When Windows ME starts, the Add New
Hardware Wizard will pop up automatically.
2) The Found New Hardware window will pop and FusionHDTV 88x, WDM Video Capture (NTSC)
driver will be installed automatically.
3) The Add New Hardware Wizard will pop up automatically and " FusionHDTV 88x, BDA Receiver
Component (ATSC-A)" driver will be installed automatically.
4) After the Files Needed Window appears, look for the 'zl88Tcap.sys' file by clicking the browse button.
Select the
Files\Dvico\FusionHDTV\driver)
All specifications and information are subject to changes without further notices
driver directory under the installation directory. (ex : C:\Program
17