2.4
Driver installation under Windows XP
2.4.1
Before Installation
Make sure that you install the software in the following order:
1) Install the Application software (with reference to 2.1 Installing FusionHDTV Applications)
2) Install Hardware (refer to 3.3 Board Installation )
3) Install the Windows XP drivers (with reference to 2.4.2 Installing Windows XP driver)
4) Check Windows XP Device Manager (with reference to 2.4.3 Checking Windows XP Driver )
2.4.2
Installing Windows XP drivers
If you already installed the FusionHDTV software, insert the FusionHDTV board into the PCI local bus
slot.
1) When the "Add New Hardware Wizard window" appears, select "Install the software automatically
(Recommended)" and then click "next" .
2) When the " FusionHDTV 88x, WDM Video Capture (NTSC)" window appears, Click "Continue
Anyway".
All specifications and information are subject to changes without further notices
23