13.1.5
To remove cross flow fan and indoor fan motor
Evaporator
Cross flow fan
18. Remove the cross flow fan from the unit by
pulling it to the left and downward.
16. Remove the bearing by pulling it
out gently
15. Remove the screw from the
evaporator.
14. Remove the screw that holding
the cross flow fan and fan motor
axis.
Figure 7
Figure 8
17. Push the holdfast to the left and lift up the evaporator.
19. Fan motor can be removed after the
Reminder: To reinstall the fan motor, adjust
the fan motor connector to 45° towards you
before fixing control board.
Figure 9
69
removal of cross flow fan.