Connecting The Power Cord (1) - Pioneer SPH-DA110 Installation Manual

Chapter
02
Connecting the system

Connecting the power cord (1)

Yellow
To terminal supplied with power regardless
of ignition switch position.
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Notes
• When a subwoofer is connected to this
product instead of a rear speaker,
change the rear output setting in the
initial setting. (Refer to the Operation
Manual.)
• The subwoofer output of this product is
monaural.
Front speaker
Left
Rear speaker or
subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with the violet and violet/black leads of this
product. Do not connect anything with the green and green/black leads.
10
En
White
White/black
Green
Green/black
Green
Not used.
Green/black
With a two-speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Gray
Gray/black
Violet
Violet/black
Violet
Violet/black
Front speaker
Right
Rear speaker or
subwoofer (4 Ω)
Subwoofer (4 Ω) X 2