Advertisement
Quick Links
Handheld Laser Distance Meter
5040A,5060A,5080A,5100A
User Manual
Thank you for purchasing our handheld laser distance meter.
Please carefully read this user manual and follow the instructions below.
Warning:
1. Before using this product, please read the safety precautions and
instructions carefully. Failure to follow the instructions mentioned in
the user manual may cause damage to this instrument, affect the
measurement accuracy or even physically harm the user or someone
else.
2. Do not try to disassemble or repair the instrument by yourself,
especially the laser emitter. Do not turn on the laser beam until you
need to use this instrument. Do not stare directly at the laser emitter.
Take a good care of your instrument and don't place it anywhere within
children's reach. This instrument is preferred to be used by
professionals only.
3. Don't point the laser beam at yourself or anyone else, especially in
the eyes. 4. Don't point the laser beam at highly-reflective object.
5. The electromagnetic radiation from this laser device may interfere
with other instrument nearby such as a pacemaker, hearing aid or
something like these.
6. Don't use this laser device in an inflammable or explosive
environment.
7. Dispose the broken instrument and used batteries properly and
discreetly. Don't mix them up with other normal household garbage.
Follow the related government regulations during disposal.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HoldPeak 5040A
Summary of Contents for HoldPeak 5040A
- Page 1 Handheld Laser Distance Meter 5040A,5060A,5080A,5100A User Manual Thank you for purchasing our handheld laser distance meter. Please carefully read this user manual and follow the instructions below. Warning: 1. Before using this product, please read the safety precautions and instructions carefully. Failure to follow the instructions mentioned in...
- Page 2 Overview: Keyboard: 1. Power On/Single Measurement/Consecutive Measurements Button 2. Area/Volume/ Pythagorean Proposition Indirect Measurement 3. Add/Subtraction/Unit Switch Button 4. Point of Reference Switch/Backlight Button 5. Data Storage 6. Clear/Power Off Button Screen: 1. Laser beam indicator 2. Point of Reference indicator 3.
- Page 3 8. Minimum Measurement indicator 9. Distance Measurement indicator 10. Primary Display Area 11. Supplementary Display Area Inserting/Replacing Batteries Open the battery compartment and insert the batteries in it and then shut the compartment with the lid.
- Page 4 When battery is low，a battery indicator icon will be displayed on the screen to remind you to replace the batteries. ·Pay attention to the polarity symbols marked inside of the compartment. · Only 1.5V AAA alkaline battery is allowed. ·Remove the batteries if you are not going to use the instrument in a long time(to avoid leak of erosive chemical substance from the batteries).
- Page 5 For indirect measurement,（such as Area/Volume measurement）, you can delete the measurements one by one and measure them again. Screen Illumination Long press the button to turn on the backlight of the screen. Long press it again to turn the backlight off. The backlight automatically goes off too if no button is pressed for 60 seconds.
- Page 6 Distance measurement，Add/Subtract，Area，Volume，Pythagorean Proposition indirect measurement Single Measurement Press the button to turn on the instrument and the laser beam is turned on simultaneously. Point the instrument at the target and then press this button again. The measuring result will appear on the primary display area of the screen.
- Page 7 be automatically calculated and displayed on the primary display area. It can continue adding limitless measurements together. Subtract: Take a measurement, then press the button twice，a symbol “-” will appear on the screen. Measure again, and then the difference will be automatically calculated and displayed on the primary display area.
- Page 8 which stands for volume with one side of it keeps blinking. Follow the instructions below： Press the button to measure the 1st blinking side（Length） again to measure the 2nd blinking side （ Width） Press the button again to measure the 3rd blinking side （ Height） Press the button The meter will automatically work out the volume based on these 3 measurements and display it on the primary display area.
- Page 9 Measurement Storage and View Measurement Storage After any single measurement is taken，if the measuring result is valid， it will be automatically stored in the internal memory of this meter. The internal memory can hold up to 20 measurements. View the Stored Measurements Press the button to enter the Record-View Mode;...
- Page 10 Technical Parameters: Model Number HP-5040A HP-5060A HP-5080A HP-5100A Measuring 100m Distance ±1.5mm(± 0.06 in) Accuracy Units m/in/ft Laser Type Class 2 635nm，< l mW Consecutive Measurements Area Measurement Volume Measurement Pythagorean Proposition Indirect Measurement Add/Subtract functions Max/Min Measurement Display Backlight...
- Page 11 0°C ~ 40°C(32°F ~ 104°F) Operation Temperature Battery 1.5V AAA*2 Product Weight 80g(without batteries) Product Size 43*25*107mm Unfavorable conditions such as strong sunlight, highly-reflective or low-reflective object may affect the accuracy of the measurements to a large extent. Use a reflective board to make the measurements more accurate when the surrounding luminous flux is low or the object is inadequately reflective.
- Page 12 1141 Budapest, Fogarasi út 77. 1095 Budapest, Mester utca 34. Tel.: *220-7940, 220-7814, 220-7959, Tel.: *218-5542, 215-9771, 215-7550, 220-8881, 364-3428 Fax: 220-7940 216-7017, 216-7018 Fax: 218-5542 Mobil: 30 531-5454, 30 939-9989 Mobil: 30 940-1970, 20 949-2688 www.holdpeak.hu E-mail: info@delton.hu Web: www.delton.hu...
Need help?
Do you have a question about the 5040A and is the answer not in the manual?
Questions and answers