Golden Technologies GP205 Owner's Manual page 14

Alanté Sport_GP205CC/SS_Owner's Manual
The standard (18 x 18) seat assembly weighs 46 pounds. Please ask for
help if you do not feel capable of safely lifting that much weight. Removal of arms
will reduce the weight of the seat.
Be sure the seat is correctly installed and locked before operating your
power chair.
Never pull on the arms or use them as a handle to move the power
chair as they could inadvertently pull out of the receiver bar causing injury.
Arm and Seat Belt Installation
1. Remove the arm width adjustment screw from the arm receiver tube at the bottom rear
of the seat frame. See figure 8.
2. Insert the arm into the arm receiver tube, so that the arm pad faces toward the front of
the unit.
3. Adjust the width of the arm.
4. Insert the arm width adjustment screw through the seat belt anchor, and secure by
tightening the adjustment screw. See figure 9.
5. Repeat steps 1 – 4 for the opposite side.
13
IV. ASSEMBLY
Figure 8
Rev C_102714
Figure 9