Table of Contents
Advertisement
≥ [Baby Monitor] is not available in the following cases:
j When [REC FORMAT] is set to [24p]
j When you set [MEDIA, VIDEO/PICTURE] to [2160/24p] or [1080/24p] in Playback Mode
Using [Baby Monitor]
≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi
Setup]
(l 186
to 189).
1
Press Wi-Fi button on this unit.
2
Touch [Baby Monitor] on the Wi-Fi menu screen.
≥ The SSID of the wireless access point to which this unit is connected is displayed.
3
Connect the smartphone to a wireless access point.
≥ To connect it, select the SSID of the wireless access point displayed on the screen of this unit.
4
Start up the smartphone application "Image App".
≥ When this unit is connected to the Internet via the wireless access point, the notification function,
which sends notifications from this unit to the smartphone, becomes available.
≥ When the connection to this unit is complete, the screen of this unit turns off. To turn on the
screen again, touch the screen.
To exit [Baby Monitor]:
Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.
≥ The message is displayed. Touch [YES] to close the indication.
What you can do with [Baby Monitor]
∫ Checking on the baby in your house
You can check the image of the baby being monitored on your smartphone.
≥ Images of baby-monitoring cannot be recorded.
≥ It cannot be confirmed with multiple smartphones simultaneously.
∫ Voice message function
The smartphone and this unit can be used like radio transceivers, allowing the users to have a
conversation by taking turns.
≥ A voice message of up to 1 minute can be sent.
≥ Open the LCD monitor of this unit when using the Voice message function.
∫ Sending notifications to your smartphone
In the following cases, this unit sends a notification to the smartphone:
≥ When baby monitoring starts
≥ When a sound is detected
∫ Sound detection
When this unit detects a sound, it can automatically send a notification to the connected
smartphone.
≥ This function can be used only if this unit is connected to the Internet via the wireless access
point when [Baby Monitor] is used.
≥ Depending on [Sound Detection Sensitivity] setting and recording conditions, sounds may not be
detected. Test the sound detection function in advance to check if sounds can be detected and
notified.
- 164 -
Advertisement
Table of Contents
