Table of Contents
Advertisement
(When using the recording screen)
Touch the recording screen on this unit and
touch
.
2
Touch [Smartphone] on the screen of this
unit.
3
Touch [QR code] on the screen of this unit.
4
Start up the smartphone application
"Image App".
5
On the smartphone, select [QR code] to scan the QR code displayed on the
screen of this unit.
≥ When using an iOS device, perform the following operations:
1 Select the option that allows you to install the app on the profile screen of the "Image App", and
follow the on-screen instructions to complete the installation.
2 Press the home button to close the displayed screen.
3 Touch [NEXT] on the screen of this unit to display its SSID.
4 After selecting the network name (SSID) of this unit from the Wi-Fi setup of the smartphone,
start up "Image App".
≥ When the connection to this unit is complete, the image being captured by the smartphone will be
displayed on the Sub Window of this unit.
≥ If the QR code cannot be scanned, refer to "Selecting this unit's SSID on the smartphone to set
up a connection".
(l
203)
A [Wireless Twin Camera]
B [Smartphone]
C [Other Camera]
D [CANCEL]
- 206 -
Advertisement
Table of Contents
