Optical Image Stabilizer Lock - Panasonic HC-WXF991 Owner's Manual

Optical Image Stabilizer Lock

In Motion Picture Recording Mode, you can further improve optical image stabilization by
touching and holding
shake that tends to occur when using zoom.
1 Touch to turn the Image Stabilizer on. (
2 Touch and hold
≥ Icon is displayed in A while you are touching and holding
≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
∫ To make the display of
Display of will not disappear even when no operation is performed for specific time with the default
setting. To make the display of
: [SETUP] # [O.I.S. LOCK DISPLAY] # desired setting
MENU
[ON]: Constantly display.
[OFF]: The icon will disappear after approx. 5 seconds without any touch operation.
≥ The Optical Image Stabilizer Lock function is not available in the following situations:
j FULL HD Slow Motion Video Mode
WXF991
j (For the
Slow & Quick Video Mode
≥ Stabilization may not be possible under strong shaking conditions.
≥ To record while moving the unit quickly, release Optical Image Stabilizer Lock.
Touch Shutter
It is possible to focus and record a still picture of a subject that is touched.
1 Touch .
≥ An icon is displayed A.
2 Touch the subject.
≥ Focus area is displayed at the touched position, and a still
picture is recorded.
≥ Depending on the recording conditions or recognition of the touched position, it may not be
possible to record the intended picture.
≥ This will not operate for recording yourself.
. With this function, you can further reduce the effects of the
.
disappear, change the setting of the [O.I.S. LOCK DISPLAY].
)

80)
l
disappear
- 82 -
.
