Ares RC Crossfire AZSZ2802 Quick Start Manual page 4

QUICK-START GUIDE BINDING/PAIRING GUIDE
9
Before flying your Crossfire you'll need to configure and tune the on-board
flight controller using Cleanflight open-source software. This software can be
sourced via Google Chrome using the following method:
1. Open Google Chrome
2. Enter 'Apps' (icon in top left corner)
3. Enter 'Web Store'
4. Enter 'Cleanflight' into the search box
5. Download 'Cleanflight Configurator' software
10
Connect the Crossfire's flight
control board to your computer
via the board's micro USB socket
and use the Cleanflight software
to configure your quad. Use the
Cleanflight Documentation &
Support section for guidance.
11
Disconnect the quad from your
computer, insert the fully charged
3s 2200mAh Li-Po and secure it
with the hook and loop strap. As
the LiPo is installed from under the
Crossfire, the body does not need
to be removed.
Full manual available to download from: www.Ares-RC.com Full manual available to download from: www.Ares-RC.com