Mounting Diagram - Chauvet COLORstrip Quick Reference Manual

COLORstrip/COLORstrip Mini QRG
Mounting
Mounting
Diagram
Control Panel
Description
DMX Linking
Starting Address
Master/Slave
Connection
Master/Slave
Runway Mode
Before mounting this product, read the
Clamp
(such as the CLP-
15N from
Chauvet)
Button Function
<MODE>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
The COLORstrip/COLORstrip Mini can work with a DMX controller when
linked by DMX serial connections. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you
are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 509.
After setting the starting DMX address, press <MODE>, then <ENTER> to
save the address to the product's memory.
The COLORstrip/COLORstrip Mini uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product
for Master/Slave operation are in the User Manual.
The COLORstrip/COLORstrip Mini uses the Master/Slave output for its
Runway mode. Instructions for connecting and configuring this product for
Runway mode operation are in the User Manual.
Safety
Safety Cable
(such as CH-05
from Chauvet)
Bracket Adjustment Knobs
4
Notes.
Mounting Bracket
EN