2 and 4.5 kW heaters, chains can be attached to the four holes in the corners of the back reflector. (Chromalox offers hanging chain kits for these heaters that will allow for instal- lations 2 to 6 feet from the ceiling.) Minimum spacings:...
8. Connect entrance wiring to pigtail leads “L1” and “L2”. Connect ground to screw provided. 9. Inspect to make sure wiring is per “Single Phase Wiring” above. OPTIONAL ACCESSORIES Chromalox STAR series radiant heaters can be field modified Hanger Kit by adding optional kits. Refer to Chart A to select the proper kit.
8. Remove failed element and replace with a new element. before servicing or replacing heating elements. Replace only with genuine Chromalox "Arctic End" elements. Use of other elements will cause excess temperatures inside The reflectors should be kept clean to obtain the maximum terminal box.
Page 6
RELATING HERETO, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE AND extent and in the manner that the same are warranted to Chromalox by Chromalox’s vendors, and then only STRICT LIABILITY) OR OTHER THEORIES, MUST BE COMMENCED WITHIN ONE (1) YEAR AFTER THE to the extent that Chromalox is reasonably able to enforce such warranty, it being understood Chromalox DATE OF SHIPMENT OR IT SHALL BE BARRED.
This manual is also suitable for:
Star-02a-81-fStar-02a-21-fStar-02a-71-fStar-02a-41-fStar-02a-61-fStar-05a-81-f...
Show all