Exterior Lighting And Signals - Renault 2016 TALISMAN Handbook

EXTERIOR LIGHTING AND SIGNALS

1
2
Side lights
š
Turn ring 4 until the symbol is
opposite mark 3: this indicator light on
the instrument panel comes on.
If the side lights are switched on, it is
possible to set the brightness of the
instrument panel and the dashboard by
turning control knob 2.
Before driving at night: check that the electrical equipment is operating
correctly. As a general precaution, check that the lights are not obscured
(by dirt, mud, snow or objects being transported).
(1/5)
3
4
Main beam headlights
á
With the dipped
headlights lit, push stalk 1. This indica-
tor light on the instrument panel comes
on.
To return to the dipped headlight posi-
tion, pull the stalk 1 towards you again.
Dipped beam
k
headlights
1
Manual operation
Turn ring 4 until the symbol is opposite
mark 3. This indicator light on the ins-
trument panel comes on.
Automatic operation
Turn ring 4 until the AUTO symbol is op-
posite mark 3: with the engine running,
the dipped beam headlights switch on
or off automatically depending on the
brightness of the light outside, without
any action on stalk 1.
beam
When driving on the left in a
left-hand drive vehicle (or vice
versa), drivers must readjust their
lights throughout their stay (see
«Electrical adjustment of the dipped
beam headlights» in Section 1).
1.85