Renault 2016 TALISMAN Handbook page 76

ON-BOARD COMPUTER: trip settings
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
On-board computer with mileage-
before-service message
Service Intervals
Resetting: to reset the distance before service, press and hold button 2 for approximately 10 seconds until the display shows
the mileage permanently.
Note: If a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the
event of an oil change, both the distance before the next service and the next oil change should be reset.
1.70
(3/5)
c) Mileage before service or oil change.
Service in
30 000 Kms / 12 mo
Service due in
300 Kms / 24 days
Service required
Interpreting the display selected
Mileage before service
With the ignition switched on, the engine not running and
the display set to "Reichweite bis zur Wartung", press button
OK for approximately 5 seconds to display the mileage before
service (distance or time to the next service). When the distance
value approaches its limit, there are several possible scenarios:
– distance/time remaining less than 900 miles (1,500 km) or
one month: the message "Service due in" is displayed along
with the nearest limit (distance or time);
– range equal to 0 km/miles or service date reached: the
message "Service required" is displayed accompanied by
©
warning light .
The vehicle requires a service as soon as possible.