Kenmore 116.31069 Use & Care Manual page 11

Extend the wand to its full length. Rotate
the locking ring to the LOCK position.
Attach the wand onto the open end of the
hose,
1
/P_ _r. Suction_ _ _//r-_Z I
,q_.,¢W.,.,"_,,Locking Ring /
\-_Unlock "_,-,_,_ Upper
"_..._._
_ Wand
Align the tabs on the wand with the "J"
slots in the hose. Push the wand into the
hose and twist to the right to lock,
Suction
Te_scop_ i
Wand
Tool
To achieve maximum reach with the
attachments, add the crevice tool to the
end of the wand by inserting and twisting
slightly.
The combination brushcan be attached
directly to the wand.
Com.,oo .
o.-° t_J
Use the brush holder without the brush for
greater suction on furniture cushions or
stairs.
Use brush holder with brush for cleaning
loose surfaces such as drapes.
TO OPERATE SUCTION
CONTROL SLIDE
Telescopic Wand
When using attachments for cleaning
draperies, small rugs with low pile and
other delicate items, rotate the suction
control slide to the open position. This
slide is located on the telescopic wand,
close to the hose. See view at left.
This will reduce suction for ease of
cleaning.
Note: Return suction control slide to the
closed position for normal cleaning.
_1_ CAUTION
When using attachments, be careful not
to overextend the stretch hose when
reaching. Trying to reach beyond the
hose stretch capability could cause the
vacuum cleaner to tip over.
TO STORE ATTACHMENTS
Remove the combination brush. Snap into
appropriate storage location.
Remove crevice tool from the wand by
twisting. Lay aside.
Remove the telescopic wand from the hose.
Twistthe wand to the left and pull from the
hoseend.
Unlockthe wand by turning the wand
locking ring to the UNLOCK position.
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
position.
Place the crevice tool down into the
compressed wand. Place the teEescopic
wand in the wand holder
_ICAUTION
DO NOT pull the vacuum cleaner around
the room by the hose. Properly damage
or personal injury could result.
,i iiill i