Pairing The Headset With Bluetooth Mobile Phone - ADURO Amplify SB10 Manual

Pairing the headset with Bluetooth mobile phone

Please make sure your mobile device is Bluetooth compatible
Note: Specific pairing procedures may vary with different mobile
devices. Please refer to your mobile device's manual for further
information. Steps as follows:
• Please keep the headset and mobile phone in the range of 3 feet
when pairing.
• Enter headset into pairing mode
• On your mobile device, go to "Settings" then go "Bluetooth"- In-
sure feature is turned on. Click on "Scan". Select Aduro SB10 from
the list.
• If prompted, enter password or PIN No:"0000", and press "Yes" or
"Confirm". (depending on your device)
• After successful pairing, select "Aduro SB10" in the Bluetooth
device list, and press "connect".
• After connect successfully, the blue LED of the headset will keep
blinking.
Note: If the pairing is not successful switch off headset, and then