How To Use; Switching On/Off Headset; Pairing The Headset With Bluetooth How To Enter Pairing Mode - ADURO Amplify SB10 Manual

Switching on / off headset
Function Operation
Press the MFB button
Switch on Blue Light blinks 3 times Power On
for 3 seconds, and
release it till the
blue LED is on
Press the MFB button
Switch off Red Light blinks 3 times Power Off
for 5 seconds, and
release it till the red
LED is on
LED Indicator Voice Prompt
Pairing the headset with Bluetooth How to enter pairing mode
Function Operation
Make sure the headset
E nter Pairing Red and Blue LEDs
is off. Press and hold
mode
MFB button for 6
seconds, and release it
till the red and blue
LEDS blink alternately
LED Indicator Voice Prompt
Pairing
blink alternately