Charging - ADURO Amplify SB10 Manual

• Charging the Aduro SB10 for the first time:
Please be sure to charge a full 3 hours before
initial use
• When you hear 3 warning tones and at the same time the red
light blinks two times, it means that battery has almost run out.
Charging the battery with Micro USB cable
• Step1: Insert USB charging cable into USB port which have
support 5V power (such as AC/DC USB adapter or USB port on
your computer)
• Step2: Connect charging cable to the Micro USB charging port
of headset.
• When the red light is on, the headset is in charging.
• When the light turns blue, the headset is fully charged.
• It takes about 3 hours to charge the headset fully.
Note: When you have charging cable plugged in, please turn off the device