Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ADURO Amplify SB10
- Page 1 ADURO SB10 MANUAL...
- Page 2 1) Pairs with any Bluetooth enabled mobile device. the headset. • Answer, end and reject call from the headset 4) Low Battery Indicator • Push Button Redial 5) Multilink technology allows you to connect to two devices at the • Voice Recognition Dial same time. All you need to do is simply repeat the pairing process • Stereo Surround Music for the second device and manually reconnect from the • Remote control buttons on the headset for Pause / Play / first device. RWD / FWD / Re-dial / voice control. 6) Voice prompt comes with five status alerts in English. Power on, 2) Automatic switching in between conversation and music. power off, pairing, pairing completed, incoming call (for iPhone, 3) Automatic connecting to the last paired device when turning on...
- Page 3 you will directly hear the ringtone instead of “in coming call”). 1. Adjustable Module for Sizing Note: Even though the paired device and headset support the same 2. > FWD Button Bluetooth profiles, the functions may be different due to the 3. < RWD Button specification difference of the -paired devices. 4. LED Indicator Light 5. Multifunction button (MFB): Power On/Off, Call Answer, Hang Up, Voice Dial Prompt, Redial, Play & Pause 6. + Volume Up 7. - Volume Down...
- Page 4 • Charging the Aduro SB10 for the first time: • Step2: Connect charging cable to the Micro USB charging port Please be sure to charge a full 3 hours before of headset. initial use • When the red light is on, the headset is in charging. • When you hear 3 warning tones and at the same time the red • When the light turns blue, the headset is fully charged. light blinks two times, it means that battery has almost run out. • It takes about 3 hours to charge the headset fully. Note: When you have charging cable plugged in, please turn off the device Charging the battery with Micro USB cable • Step1: Insert USB charging cable into USB port which have support 5V power (such as AC/DC USB adapter or USB port on your computer)
- Page 5 Switching on / off headset Pairing the headset with Bluetooth How to enter pairing mode Function Operation LED Indicator Voice Prompt Function Operation LED Indicator Voice Prompt Press the MFB button Make sure the headset Switch on Blue Light blinks 3 times Power On E nter Pairing Red and Blue LEDs Pairing for 3 seconds, and is off. Press and hold mode blink alternately release it till the MFB button for 6 blue LED is on...
- Page 6 Pairing the headset with Bluetooth mobile phone sure feature is turned on. Click on “Scan”. Select Aduro SB10 from Please make sure your mobile device is Bluetooth compatible the list. Note: Specific pairing procedures may vary with different mobile • If prompted, enter password or PIN No:“0000”, and press “Yes” or devices. Please refer to your mobile device’s manual for further “Confirm”. (depending on your device) information. Steps as follows: • After successful pairing, select “Aduro SB10” in the Bluetooth • Please keep the headset and mobile phone in the range of 3 feet device list, and press “connect”. when pairing. • After connect successfully, the blue LED of the headset will keep • Enter headset into pairing mode blinking. • On your mobile device, go to “Settings” then go “Bluetooth”- In- Note: If the pairing is not successful switch off headset, and then...
- Page 7 repeat the pairing process again MAKING Re-connecting to a Bluetooth device CALLS WITH Automatic connecting Every time the headset is switched on, it will connect to last connected device automatically, of course the source device THE HEADSET>>>>>>>>> Bluetooth must be in the “on” states...
- Page 8 Function Status of headset Operation Function Status of headset Operation Voice dial Standby mode Press and hold MFB button for 1 second, release it Volume Conversation Short press - key down mode until you hear indicator sound, then say the name you want to call. Answer Ringing Short press MFB Redial last Standby mode Press MFB twice quickly calling number Press and hold MFB button for 1 second, and Reject Ringing Volume up Conversation Short press + key mode calling release until you hear indicator sound • N ot all the mobile phones support all the functions listed above. Please refer to the instruction of your mobile phone...
- Page 9 Function Status of headset Operation PLAYING Pause Playing music Short press MFB Play Pausing Short press MFB MUSIC>>>>>>>>>>>>>>>>>> Next song Playing music Short press > key Short press < key Last song Playing music Volume up Playing music Short Press + key Volume down Playing music Short press - key •Note: When the volume of headset is adjusted to max. or min, you will hear an indicator tone.
- Page 10 LED Battery Charging mode LED Operation mode LED indicator Status of headset LED indicator Status of headset Red and blue LEDs Pairing Mode blink alternately Red LED is on Charging Blue LED quickly Not connected to blinks twice every a device 1 seconds. Blue LED is on Finish Charging Red LED blinks twice Low Power every 20 seconds...
- Page 11 Low power Indication tone Chimes every 20 seconds Aduro warrants this product to be free from defects in materials Care and maintenance and workmanship for one year. If your Aduro product is found to • Keep dry and don’t put in damp place. be defective within that time, Aduro will promptly replace it. This • Don’t put the product under the sunlight or place hot areas. High warranty does not cover accidental damage, wear and tear, or temperature will short the life of any electronic device, destroy consequential or incidental loss. Under no conditions is Aduro the battery, or distort the housing. liable for loss of, or damage to devices; nor loss of, or damage to, • Don’t expose the product to extreme cold. programs, records, or data; nor any consequential or • Don’t try to take apart the product. incidental damages, even if Aduro has been informed of • Don’t use intensify chemical or detergent to clean the product. their possibility.
- Page 12 This device complies with part 15 of the FCC Rules Operation. It is Bluetooth version Bluetooth V3.0+EDR • SUPPORT: HSP, HFP, A2DP and AVRCP subject to the following two conditions: Buttons Volume up/down • Song last/next 1. This device may not cause harmful interference. MFB pair/pick up call/hang up call/redial 2. This device must accept any interference that is received, Effective range 33 Feet including any interference that may cause an undesired Working time Music: Up to 10 hours • Talk: Up to 11 hours operation. Standby time Up to 250 hours Input DC: 5V/160mA Charging time Approx 3 hours Microphone Bulid-in 360° Omin directional...
- Page 13 ADURO SB10 Distributed by Aduro Products. 109 2nd Avenue • Brooklyn, NY 11215 We’re here to help. If you have any issues with this product, please contact us at: cs@aduroproducts.com © Aduro. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. In style mobile accessories at www.aduroproducts.com...
Need help?
Do you have a question about the Amplify SB10 and is the answer not in the manual?
Questions and answers