Attaching the stand
•
Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
•
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
Confirm the screws supplied with the TV.
4 screws (used in step 3)
2
Attach the stand base to the rear of
the TV ( 1 ). Attach it with matching the
stand projections and TV holes, when
you assemble the stand.
3
Insert and tighten the 4 screws into the
4 holes on the bottom of the stand base
( 2 ).
NOTE
•
To detach the stand, perform the steps in reverse order.
•
The illustrations used throughout this manual are based on LC-23LE160H.
Setting the TV
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
An outdoor antenna
Aerial connections: IEC(female).
Input impedance: 75Ω unbalanced.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
Soft cushion
HEADPHONE
To antenna terminal
1
COAXIAL
Y/VIDEO
Pb
Pr
L-AUDIO-R
AUDIO IN
COMPONENT/AV IN
DTV/ATV
VGA PC
VGA PC
DIGITAL AUDIO OUT
2
Screw
Screw driver
3