Tv Menu - Sharp LC-23LE160H Operation Manual

TV menu

TV
MPX
Auto Search
Manual Search
Edit Channel
EPG
Clear Channel List
Move Select
MPX
Selects audio modes when watching analog broadcast
programme. (Stereo, Mono, DUAL I, DUAL II, DUAL
I+II, Game, NICAM Mono)
Auto Search
TV automatically searches for the channel and stores
sequentially. Select DTV+ATV Auto Search, DTV
Auto Search, or ATV Auto Search.
Manual Search
Search for the channels manually and store it to the
desired channel number.
Digital Manual Search
1. Enter the required channel frequency by pressing
/ button or number key in [VHF/UHF CH]
window.
2. Press ENTER button to start manual search.
Analogue Manual Search
1. Enter the required channel frequency by pressing
/ button or number key in [Start Frequency
(MHz)] and [End Frequency (MHz)] window.
2. Press / button to select [Start Search] and
press ENTER button to start manual search.
Edit Channel
Edit the selected channel.
1. Enter TV menu.
2. Select Edit Channel and press ENTER button or
button to enter.
TV
No. Type
1 ATV
2 ATV
3 ATV
4 ATV
5 ATV
6 ATV
Swap
Move Select
Swap Channel
Press Red key on remote control to swap/
interchange the channels, so that you can arrange
tuned channels as per your requirements.
10
Mono
Return Exit
Freq(MHz) System Name
55.25 NTSC-MN C-00
61.25 NTSC-MN C-00
67.25 NTSC-MN S-00
77.25 NTSC-MN S-00
83.25 NTSC-MN S-00
91.25 NTSC-MN S-00
Delete
Return Exit
Delete Channel
Press Blue key on remote control to delete the
selected channel from the channel list.
3. Select a channel and press ENTER button to enter
its sub menu.
TV
Channel Number:
Channel Name:
Frequency:
Colour System
Sound System
Fine-Tune
Skip
Save
Move Select
Channel Number
Shows the current channel number.
Channel Name
Enter a name (up to 6 characters) for the selected
channel. Press ENTER button to get on-screen
keyboard.
Frequency
Shows the current frequency of the current
channel.
Colour System
Change the colour system to one that is compatible
with the image on the screen.
NOTE
•
If "Auto" is selected, colour system for each
channel is automatically set. If an image does
not display clearly, select another colour system
(e.g. PAL, SECAM).
Skip this step if your system setting is correct.
Sound System
Press < / > key to select optimum sound
system(DK/MN/BG/I).
NOTE
•
Check the sound system if the sound output
were not correct.
Fine-Tune
Fine tune the frequency of current channel.
Skip
When set to On, the current channel will be
skipped while switching between channels using
CH /CH buttons.
To watch the skipped channel, press numeric keys
on remote control.
Save
TV will pop-up a window asking whether to save
the changes made. Select Enter to save and exit,
select Cancel to exit without saving.
1
C-00
55.25
NTSC
DK
Off
Return Exit