Table of Contents
Advertisement
21
In the screen above choose whether you have extracted 6 or 7 bytes from the vehicle, once an option is
selected the boxes below become available. Type the extracted bytes in order into the boxes and select the
manufacturer of the vehicle. If the bytes have been extracted using the Advanced Diagnostics OBD equipment
then check the option, if not leave unchecked. Once all steps have been completed, click next to proceed to
write to the transponder.
th
Finding the 7
byte:
NB. This section describes the process when used with Advanced Diagnostics OBD equipment. For other
equipment please refer to the manufacturer's instructions.
If you managed to extract all 7 bytes then you are able to write them straight out to a transponder and may
th
skip this step. But if you can only extract 6 of the 7 bytes here is how to find the 7
using our progressional
writing method.
st
Touchclone™ Version 1.5 – Manufactured & Developed by 1
Call Lockouts Limited. All rights reserved 2012.
Advertisement
Table of Contents
