Service Manual
Issue
Rev.
Model No.DW12-TFE1 DW12-TFE2
12. How to keep your dishwasher in shape
12-1. After Every Wash
After every wash, turn off the water supply (not necessary for models with "Aquastop" ) the
appliance and leave the door slightly ajar so that moisture and odors are not trapped inside.
12-2. Remove the plug
Before cleaning or performing maintenance, always remove the plug from the socket. Do not run
risks.
12-3. No solvents or Abrasive Cleaning Products
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning
products. Rather, use only a cloth and warm soapy water.
To remove spots or stains from the surface of the interior, use a cloth dampened with water and a
little while vinegar, or cleaning product made specifically for dishwashers.
12-4. Moving the Appliance
If the appliance must be moved, try to keep it in a vertical position. If absolutely necessary, it can
be positioned on its back.
12-5. Seals
One of the factors that cause odors to form in the dishwasher is food that remains trapped in the
seals.
Periodic cleaning with a damp sponge will prevent this from occurring.
The door should not be left in the open position since this could present a tripping
hazard.
12-6. When You Go on Holiday
When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty
and then remove the plug from the socket, turn off the water supply and leave the door of the
appliance slightly ajar. This will help the seals last longer and prevent odors from forming within
the appliance.
31