Schematic Diagrams; This Note Is Common For Schematic Diagrams - Sony BDP-S5000ES Service Manual

QQ
3 7 63 1515 0
4-1.

THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS

• All capacitors are in µF unless otherwise noted. pF : µµF.
50V or less are not indicated except for electrolytics and tantal-
ums.
• All resistors are in ohms, 1/4 W (Chip resistors : 1 /10 W) un-less
otherwise specified.
kΩ=1000Ω, MΩ=1000kΩ.
• % : indicates tolerance.
• Caution when replacing chip parts.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum capacitor, because
it is damaged by the heat.
• Constants of resistors, capacitors, ICs and etc with XX indicate
that they are not used.
In such cases, the unused circuits may be indicated.
• All variable and adjustable resistors have characteristic curve B,
unless otherwise noted.
• : nonflammable resistor
• : fusible resistor
• : panel designation
• : internal component.
f
• : adjustment for repair.
• : B+ Line
• : B– Line
• Circled numbers refer to waveforms.
• Voltages are dc between measurement point.
• Readings are taken with a color-bar signals on Blu-ray disc.
• Readings are taken with a digital multimeter (DC 10MΩ).
• Voltage variations may be noted due to normal production toler-
ances.
Note:
The components identified
by mark 0 or dotted line
TE
L 13942296513
with mark 0 are critical for
safety.
Replace only with part num-
ber specified.
When indicating parts by reference number, please include the
board name.
• Abbreviation
AUS : Australian model
CND : Canadian model
HK : Hong Kong model
RUS : Russian model
TH : Thai model
www
.
http://www.xiaoyu163.com
SECTION 4

SCHEMATIC DIAGRAMS

Note:
Les composants identifiés par
une marque 0 sont critiquens
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spéci-
fié.
x ao u163
y
i
2 9
8
Q Q
3 6 7 1 3 1 5
co
.
-1
BDP-S5000ES
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9