Windshield Wipers - GMC 2010 T-Series Owner's Manual

Windshield Wipers

The windshield wiper lever is located on the right side of
the steering column.
Turn to the following positions to control the wipers:
9
(OFF) : Turns the wipers off.
- - - (Intermittent) : Delays the wiper speed. After
selecting the intermittent setting the wiper speed can
also be set. See the following text for more information.
: Turn this band on the windshield wiper lever to set
the delay time between wipes. The closer to the top of
the lever, the shorter the delay.
R
: Slow wipes.
R R
: Fast wipes.
Clear ice and snow from the wiper blades before
using them. If the wipers are frozen to the windshield,
carefully loosen or thaw them. If they become worn or
damaged, get new blades or blade inserts. For more
information, see Windshield Wiper Blade Replacement
on page 5 55.
The windshield wiper motor is protected from overload
by a circuit breaker and a fuse. If the motor overheats
due to heavy snow or ice, the wiper will stop until the
motor cools. Although the circuit is protected from
electrical overload, overload due to heavy snow or
ice may cause wiper linkage damage.
3-9