Operation
3.
Place the throttle grip in the "
(start) position.
4.
Pull out / turn the choke knob fully. After
the engine starts, replace / return the
knob to the home position.
TIP:
It is not necessary to use the choke when
●
starting a warm engine.
If the choke knob is left in the "
●
(start) position while the engine is running,
the engine will run poorly or stall.
34
5.
Pull the manual starter handle slowly un-
til you feel resistance. Then give a
strong pull straight out to crank and start
the engine. Repeat if necessary.
ZMU02953
"
6.
After the engine starts, slowly return the
manual starter handle to its original posi-
tion before releasing it.
7.
Slowly return the throttle grip to the fully
closed position.
ZMU02954
TIP:
When the engine is cold, it needs to be
●
warmed up. For further information, see
page 38.
If the engine does not start on the first try,
●
ZMU02955
repeat the procedure. If the engine fails to
start after 4 or 5 tries, open the throttle a
small amount (between 1/8 and 1/4) and
try again. Also if the engine is warm and
fails to start, open the throttle a same
"
amount and try to start the engine again. If
the engine still fails to start, see page 62.
ZMU02956
ZMU02030