Operate the throttle levers several times to
●
make sure there is no hesitation in their
travel. Operation should be smooth over
the complete range of motion, and each le-
ver should return completely to the idle po-
sition.
Look for loose or damaged connections of
●
the throttle and shift cables.
EMU36483
Engine shut-off cord (lanyard)
Inspect the engine shut-off cord and clip for
damage, such as cuts, breaks, and wear.
1. Engine shut-off switch
2. Cord
3. Clip
1. Cord
2. Clip
3. Engine shut-off switch
1
2
3
ZMU02941
EMU27120
Oil
Check to be sure you have plenty of oil for
●
your trip.
EMU27141
Engine
Check the engine and engine mounting.
●
Look for loose or damaged fasteners.
●
Check the propeller for damage.
●
EMU36954
Install top cowling
1.
Be sure that the cowling lock lever is re-
leased.
2.
Be sure that the rubber seal is seated all
the way around the top cowling.
3.
Place the top cowling on the bottom
cowling.
4.
Check to be sure the rubber seal is seat-
ed correctly between the top cowling
and the bottom cowling.
5.
Move the lever to lock the cowling as
shown. NOTICE: If the top cowling is
not installed correctly, water spray
under the top cowling can damage
the engine, or the top cowling can
blow off at high speeds.
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
Operation
[ECM01991]
ZMU06109
29