Watts OneFlow OF110-1 Nstallation, Operation And Maintenance Manual

Watts OneFlow OF110-1 Nstallation, Operation And Maintenance Manual

Hide thumbs Also See for OneFlow OF110-1:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Installation, Operation and
Maintenance Manual
Model OF110-1
OneFlow
Anti-Scale System
®
Chemical-Free, Salt-Free Scale Prevention
Introduction
The OneFlow
Anti-Scale System will condition the tap water
®
providing optimum water characteristics for their specified applica-
tions. The result is reduced equipment maintenance requirements,
longer equipment life and improved quality & consistency of your
products.
The OneFlow
system is built with the finest and most advanced
®
materials and each system is quality inspected and pressure
tested prior to shipment. With proper installation and routine
maintenance, you will have years of trouble-free operation.
Please refer to this manual when performing routine filter changes.
The instructions make periodic maintenance quick and easy and
ensure you will receive maximum benefit from your system.

System Specifications

Maximum Pressure: 125psi/8.6 bar
Maximum Temperature: 100°F/38°C
Min.: 35°F/2°C
Inlet/Outlet Connections:
Service Flow Rate: 0-1 gpm
Gallon Rating: OF110-1: 1 year for the OF110RM
Capacity: OF110RM cartridge does not have a grain removal
capacity, however, other contaminants present in the water will
gradually degrade the effectiveness of this cartridge. Change the
OF110RM cartridge at least once a year.
/
" FNPT
1
2
IOM-OF110-1

Advertisement

Table of Contents
loading

Summary of Contents for Watts OneFlow OF110-1

  • Page 1: System Specifications

    IOM-OF110-1 Installation, Operation and Maintenance Manual Model OF110-1 OneFlow Anti-Scale System ® Chemical-Free, Salt-Free Scale Prevention Introduction The OneFlow Anti-Scale System will condition the tap water ® providing optimum water characteristics for their specified applica- tions. The result is reduced equipment maintenance requirements, longer equipment life and improved quality &...
  • Page 2: Notice To Installer

    Notice to Installer Installation Precautions! • Do not discard this manual after installation. This manual • Do NOT install system on line pressure above 125psi. contains important operation, maintenance and precautionary • Do NOT install system on HOT water line. Failure to limit line information.
  • Page 3 Installation Drawings & Dimensions...
  • Page 4: Operation

    Operation With sufficient pressure, operation of the Watts OneFlow system ® is completely automatic. Dependable operation involves only peri- odic filter changes and service documentation. Maintenance Replacement Filter Cartridges Routine maintenance of your OneFlow system involves periodic ® filter cartridge changes and/or replacement of sump O-rings. If the...
  • Page 5 Replacement Parts for: OneFlow OF110-1 ® Drawing ID # Description Housing, " #10 w/PR O-Ring Valve, "FxM Ball Bracket, Single Housing OF110RM Replacement Cartridge Screws...
  • Page 6: Limited Warranty

    7. Defective parts are subject to inspection by either Watts Regulator Company or any authorized representative before final commitment of warranty adjustment is made. 8. Watts Regulator Company reserves the right to make changes or substitutions in parts or equipment with material of equal quality or value and of then current production.
  • Page 7: Especificaciones Del Sistema

    IOM-OF110-1 Manual de instalación, funcionamiento y mantenimiento Modelo OF110-1 Sistema antisarro OneFlow ® Prevención de sarro sin sustancias químicas, sin sal Introducción El Sistema antisarro OneFlow acondicionará el agua corriente ® brindándole características óptimas para sus aplicaciones específicas. Como resultado se reducen los requisitos de mantenimiento del equipo, se prolonga su duración y se mejora la calidad y consistencia de sus productos.
  • Page 8: Precauciones En La Instalación

    Aviso para el instalador Precauciones en la instalación • No desechar este manual después de la instalación. • NO instalar el sistema a una presión de línea superior a 125 psi. Este manual contiene información importante acerca del • NO instalar el sistema en una tubería de agua CALIENTE. Si la funcionamiento, mantenimiento y medidas de precaución.
  • Page 9 Diagramas y dimensiones de instalación ADAPTADOR DE 1/2" MPT NECESARIO PARA ADAPTAR LA ADAPTADOR DE 1/2" ENTRADA FPT. MONTAR A UNA PARED FIRME MPT NECESARIO EN ENTRAMADOS O PANEL PARA PARA ADAPTAR A PARED. NO MONTAR A TABLAROCA LA SALIDA FPT. NI PLACA DE YESO SIN SOPORTE.
  • Page 10: Mantenimiento

    Funcionamiento Si la presión es suficiente, el funcionamiento del sistema OneFlow de Watts es totalmente automático. Para que ® el funcionamiento sea confiable sólo se requieren cambios periódicos de los filtros y el registro del mantenimiento. Mantenimiento Cartuchos de filtro de repuesto...
  • Page 11 Piezas de repuesto para: OneFlow OF110-1 ® Nº de referencia Descripción del diagrama Alojamiento, " Nº 10 con PR Junta tórica Válvula, esférica de " FxM Soporte, alojamiento simple Cartucho de repuesto OF110RM Tornillos...
  • Page 12: Garantía Limitada

    8. Watts Regulator Company se reserva el derecho a realizar cambios o sustituciones en las piezas o el equipo por materiales de valor o calidad equivalente y producción vigente en el momento.
  • Page 13: Spécifications Du Système

    IOM-OF110-1 Manuel d’installation, de fonctionnement et d’entretien Modèle OF110-1 Système antitartre OneFlow ® Prévention contre le tartre sans produits chimiques ni sel Introduction Le système antitartre OneFlow permet de conditionner l’eau ® du robinet et d’obtenir des caractéristiques d’eau optimales pour leurs applications spécifiques.
  • Page 14: Précautions D'installation

    Avis à l’installateur Précautions d’installation ! • NE PAS installer le système sur une pression de conduite supérieure • Ne pas jeter ce manuel après l’installation. Ce manuel contient des à 125 psi. informations importantes concernant le fonctionnement, l’entretien et les précautions à...
  • Page 15 Schémas d’installation et dimensions ADAPTATEUR D’1/2 PO MPT REQUIS POUR L’ENTRÉE FPT. ADAPTATEUR D’1/2 PO MPT REQUIS MONTER SUR DES POTEAUX DE POUR CLOISON OU DES PANNEAUX MU- LA SORTIE FPT. RAUX SOLIDES. NE PAS MONTER SUR DES PANNEAUX DE PLÂTRE OU DE GYPSE NON SOUTENUS.
  • Page 16: Entretien

    Fonctionnement Avec une pression suffisante, le fonctionnement du système OneFlow ® de Watts est complètement automatique. Un fonctionnement fiable requiert uniquement un remplacement régulier des filtres et l’enregistrement des dates d’entretien. Entretien Cartouches de filtre de rechange L’entretien de routine du sytème OneFlow implique un remplacement ®...
  • Page 17 Pièces de rechange pour : OneFlow OF110-1 ® N° de Description schéma Boîtier, po n° 10 avec limiteur de pression Joint torique Robinet à bille d’ po FxM Support de boîtier unique Cartouche de remplacement OF110RM...
  • Page 18: Garantie Limitée

    7. Les pièces défectueuses seront soumises à une inspection par Watts Regulator Company ou par un représentant agréé avant que le recours en garantie final ne soit accepté. 8. Watts Regulator Company se réserve le droit de remplacer ou de changer les pièces ou l’équipement par un matériau de qualité et de valeur éga- les et en cours de production.
  • Page 20 États-Unis : 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com Une entreprise de Watts Water Technologies Canada : 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca IOM-OF110-1 1017 Réf. EDP 2915004 © 2010 Watts...

Table of Contents