Working Instruction, Mechanical
4.1.5 Antenna Lid asm
M
OST IMPORTANT TO START THE INSTALLATION OF THE
!
ANTENNA LID IN THE LOWER RIGHT CORNER
Continue to snap the antenna lid onto the phone, first at the
bottom.
And then on the top of the phone.
Check that there are no gaps along the sides.
If there still is a gap somewhere, gently press the two
halves together with your fingers.
Apply 9 Ncm ± 2 Ncm torque by tightening the screw using
the JCIS bit.
R
.
EPLACE THE SCREW IN CASE IT IS DAMAGED
3/000 21-1/FEA 209 544/111 A
52(56)
©
Sony Ericsson Mobile Communications AB