Working Instruction, Mechanical
3.21 Antenna asm
Follow the 2.1.1 – 2.1.10 Disassembly instructions!
Remove the two screws from the antenna by using the
JCIS bit.
R
EMOVED SCREWS CAN BE REUSED ONLY IF THEY ARE NOT
!
DAMAGED
Release the two hooks (see picture above) that secure the
antenna and at the same time push from the back with your
finger until it gets unhooked.
Do the same on the opposite side to make the antenna
become released from the frame.
Remove the antenna.
3/000 21-1/FEA 209 544/111 A
37(56)
©
Sony Ericsson Mobile Communications AB