Table of Contents
Advertisement
Installation
Connecting to an external device
Connecting to the monitor
\ \
This product supports 1080p 60 Hz HDMI monitors and regular monitors that support DVI and VGA inputs. Connect an
HDMI cable to the port on the product
Or, use VGA cable to connect the product with a VGA monitor.
Once the product is set for NTSC or PAL output, connect cameras of the corresponding video standard for
~
proper operations.
Power Connection
\ \
Plug the provided DC 12V adaptor in the rear power port of the DVR.
When done, attach the Adapter cable retainer clip to the rear panel and insert the cable in.
J
J
J
J
J
J
16
|
Installation
s rear bottom, or connect an HDMI-DVI converter cable to connect a DVI monitor.
'
For stable operation of the product, it is recommended to use the provided adapter. (8/16ch, 7.5A)
Make connection when the power is not applied yet.
Arrange up the cables and be careful not to peel off the cable coating.
Do not place the power cord under the carpet or rug. The power cord is usually earth-grounded. However, even if
it's not earth-grounded, do never modify it on your own for earth-grounding.
Do not insert multiple devices in a single power socket. Otherwise, it may cause a power overload.
For stable power supply, this product provides two separate adaptors and two corresponding AC cords by factory
default. Make sure all cables are connected properly.
AUDIO
AUDIO
IN
OUT
ALARM IN
RELAY2
RS232
RELAY1
RS485
VGA
HD-MONITOR
e-SATA USB
LAN(DOWNLINK) WAN(UPLINK)
Power adaptor
DC 12V
DC12V
Advertisement
Table of Contents
