Draytek Vigor2600 Quick Start Manual page 17

WEP Security of Wire-
less LAN Interface
SSID (Service Set Identification): You should set the SSID same as your note
book wireless card to allow the client PCs to access the network via the wireless
LAN interface. The default SSID is "default".
Channel: To select a wireless channel for Vigor2600W/2600We. The default channel
is 6.
Hide SSID: To check it to hide SSID when the wireless clients sniffing radio.
WEP Encryption:
To improve the security and privacy of your wireless data packets the WEP encryption
feature can be used. The WEP encrypts each frame transmited from the radio using
one of the keys entered from this panel. WEP encryption can be enabled by selecting 64
bits or 128 bits from pull down menu. There are 4 key sets can be entered and only one
key can be selected. The key can be enterd by ASCII or Hexadecimal.
Disable: Turns off the WEP encryption mechanism.
WEP 64 Bit: For 64bits WEP key, either 5 ASCII characters or 10 hexadecimal
digitals leading by 0x can be entered. For example ABCDE or 0x4142434445.
WEP 128 Bit: For 128bits 13 ASCII characters or 26 hexadecimal digits leading by
0x can be entered. For example, ABCDEFGHIJKLM or
0x4142434445464748494A4B4C4D.
17