Table of Contents
Advertisement
Mechanical Disassembly
Mechanical disassembly should be made following procedures in numerical or-
der.
Following steps show the basic procedures, therefore unnecessary step may
be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original
otherwise it may cause loss of performance and product safety.
z Cabinet Top, Front, R/C and R-Net Board removal
1. Remove the cabinet top (Before removing the cabinet top,
open the Lens cover fully).
2. Remove the Cabinet front.
3. Remove the R/C and R-Net board.
R/C Board
Lens cover
(T2x6)
Cabinet front
(M2.5x6)x2
((T2x6)
R-Net Board
(M2.5x6)
-12-
Screws Expression
(Type
) mm
Diameter x Length
T type
M Type
(T3x10)(Black)x5
Cabinet top
Fig.1
Advertisement
Table of Contents
