Download Print this page

Philips AJL305 Quick Start Manual page 4

Voice memo clock radio
Hide thumbs Also See for AJL305:

Advertisement

1. Check box "Sync time with PC real time clock".
2. Check box "Auto Brightness".
3. Select the start time and end time from the list.
- Time is rounded to a smaller hour on the set.
Tips:
You can set the timer to start at night and end in
the morning so that AJL305 automatically dims
at night and lights up in the morning.
You can back up the settings on the PC and
restore the photos deleted by mistake.
1. Browse to a directory where you want to store
the settings.
2. Click "Save" to save your settings.
To restore photos,
1. Click "Restore".
2. Click "OK" to exit.
Step 5: Synchronization
1. Click SYNC to synchronize AJL305 Photo
Manager with AJL305.
➜ On screen display and AJL305 Photo
Manager are in the same language.
Warning:
Do not disconnect the power adapter of the set
or disconnect the set from the PC during
synchronization.
Tips:
If synchronization is interrupted accidentally, plug
in AJL305 again.
All five displays are blank. It is
normal.
a. Connect the supplied mains adapter to the
set's 9V DC jack and the plug into a wall outlet.
b. Press RESET.
c. Restart AJL305 Photo Manager.
d. Click "Sync" to synchronize AJL305 with your
PC again.
2. Setting clock and alarm
1. Press and hold CLOCK on the set to enter
clock setting quickly.
2. Press and hold ALARM on the set to enter
alarm setting quickly.
For detailed setting operations, refer to the
supplied user manual.
3. Using voice memo
You can leave messages to each person in the
album and playback the messages.
1. Press PHOTO.
2. Press REC.
3. Press SELECT below a certain person.
4. Press REC.
5. Speak near the MIC.
6. Press REC to end recording.
7. Press the button below the photo with
➜ Message playback starts automatically.
4. Auto Tuning
You can make the set automatically scan FM
stations and stores up to 15 preset stations by
selecting Radio Tuner in Setup mode.
5. Using the stand
The set is equipped with a stand on the bottom
panel. To set the unit for a different viewing angle,
take the stand out, then place it back by
reversing the side of the stand.
.

Advertisement

loading