Table of Contents
Advertisement
TROUBLESHOOTING
PROBLEM
The lid cannot be opened at
the end of the cooking cycle
'Open Lid' is displayed on
the LCD when the lid is open
Steam is escaping from
the lid
The Safety Locking Pin does
not rise in the Pressure
Cook setting (unable to
build pressure)
The cooker automatically
switches to keep warm
without going through a
complete cooking cycle
Water is collecting on the
benchtop
26
EASY SOLUTION
•
Press the STEAM RELEASE button until all internal
pressure is released and the cooker can be opened.
•
If this occurs frequently, the cooker may need to
be adjusted to suit your current altitude. Follow
"Altitude Adjust" instructions on page 12.
NOTE: The safety locking pin will drop
when the lid can be open.
•
Turn the lid knob clockwise and counter clockwise.
•
Assemble the lid correctly ensuring there is no
gap between lid arm and the stainless steel lid.
The sealing nut should be screwed up tightly.
•
Ensure the silicone lid seal is fitted correctly.
Follow "Preparing the Fast Slow Pro" instructions on
page 10.
•
Clean the silicone lid seal or inspect for any cracks
or cuts and replace if required. Follow "Care and
Cleaning" instructions on page 24.
•
Ensure that the safety locking pin can move freely
up and down.
•
Ensure that the pressure release valve is in place
and oriented correctly. Follow step 8 on page 15.
•
Ensure that the pressure release valve is in place
and oriented correctly. Follow step 8 on page 15.
•
Add more liquid/food to the bowl.
•
Call Breville Customer Service.
•
Add more water to the cooking bowl and restart
the cycle.
•
Ensure the unit is on a flat level surface and that
the condensation drip cup is assembled on the back
of the cooker. Follow "Preparing the Fast Slow Pro"
instructions on page 10.
•
Empty the condensation drip cup. Follow "Care and
Cleaning" instructions on page 24.
Hide quick links:
Advertisement
Table of Contents
