Slow Cook - Breville the Fast Slow Pro BPR700 Instruction Booklet

OPERATING YOUR BREVILLE PRODUCT

SLOW COOK

The SLOW COOK setting has cooking
profiles designed for long cook times at low
temperatures. It is ideal for breaking down
tough cuts of meat and developing deep
flavours.
1. Turn the START/SELECT dial until the
indicator reaches the SLOW COOK
setting. Press the START/SELECT dial
to confirm.
2. Turn the START/SELECT dial until the
indicator on the right hand side of the LCD
reaches the desired setting.
3. The top figure on the LCD screen indicates
the preset temperature for the selected
setting. Turn the TEMPERATURE/
PRESSURE dial to the left to reduce the
temperature or to the right to increase
temperature. Temperature can be adjusted
to one of two preset temperatures; 'LO'
or 'HI'.
4. The bottom figure on the LCD screen
indicates the preset cooking time for the
selected setting. Turn the TIME dial to the
left to reduce the cooking time or to the
right to increase the cooking time. Time
can be adjusted between 2 and 12 hours.
5. 'KEEP WARM' indicates the KEEP WARM
function will automatically switch on after
the SLOW COOK cycle. Press the KEEP
WARM button on the control panel to
select or deselect the function.
6. Place food into the removable cooking
bowl. Ensure there is at least 1L of
combined food and liquid in the bowl.
MINIMUM OF 1L
OF COMBINED
FOOD & LIQUID
7. Close the lid but do not lock.
8. Remove the pressure release valve from
the lid.
9. Press the START/SELECT dial to
commence cooking. The STOP/CANCEL
button backlight will illuminate red and the
LCD screen will illuminate orange.
10. The timer will be displayed and
automatically begin to count down. The
time can be adjusted during the slow cook
cycle by turning the TIME dial. The cycle
can be paused at any time by pressing
the STOP/CANCEL button. To end the
cycle press and hold STOP/CANCEL for
2 seconds.
11. At the end of the slow cook cycle, the
cooker will automatically switch to the
KEEP WARM function. The LCD screen
will display 'KEEP WARM' and the timer
will start counting up to a maximum of
2 hours. The keep warm cycle can be
paused at any time by pressing the STOP/
CANCEL button.
12. If KEEP WARM has not been selected,
the cooker alert will sound, the STOP/
CANCEL button backlight will go out and
the LCD screen will illuminate blue.
13. After 5 minutes of inactivity, standby mode
will be activated. The button backlight
will go out and the LCD will no longer
illuminate.
17