Table of Contents
Advertisement
Display Problems
The display panel is blank when the system is turned on -
Make sure the computer is not in the Standby or
Hibernate suspend modes. The display is turned off to
conserve energy in these modes.
The screen is difficult to read -
The display resolution should at least be set to at
least1024x768 for optimal viewing.
1.
Go to [Start > Settings > Control Panel] and double-click
the Display icon.
2.
Under the Settings page, set screen resolution to at least
1024x768 and choose at least 256 colors.
The screen flickers -
It is normal if the display flickers a few times during
shutting down or powering up.
5-8
■ chapter 5 trouble shooting
Advertisement
Table of Contents
Need help?
Do you have a question about the PRAXIS N1212 and is the answer not in the manual?