Hotsy 1710 Operating Instructions And Parts Manual

Hotsy 1710 Operating Instructions And Parts Manual

1700 series
Hide thumbs Also See for 1710:

Advertisement

Read instructions carefully before attempting to assemble, install, operate or service this pressure
washer. Failure to comply with instructions could result in personal injury and/or property damage!
1710
1732
1744
®
serial number:
date purchased:
for sales and service, please contact:
NOTE: This manual is intended for use
with the following model releases only:
1720
1722
1723
1733
1734
1735
1745
1750
1752
model 1700
OPERATING INSTRUCTIONS
AND PARTS MANUAL
1724
1725
1740
1742
1753
1754
1730
1743
1755
97-6419

Advertisement

Table of Contents
loading

Summary of Contents for Hotsy 1710

  • Page 1 Read instructions carefully before attempting to assemble, install, operate or service this pressure washer. Failure to comply with instructions could result in personal injury and/or property damage! NOTE: This manual is intended for use with the following model releases only: 1710 1720 1722 1723...
  • Page 2 1710 specifications 1730 specifications  Pump Volume At Pump Head: 2.75 GPM  Pump Volume At Pump Head: 3.46 GPM  Pump Pressure At Pump Head: 1000 PSI  Pump Pressure At Pump Head: 3000 PSI  Machine Voltage: 120VAC/60Hz/1Ph  Machine Voltage: 230VAC/60Hz/1Ph ...
  • Page 3 1740 specifications 1750 specifications  Pump Volume At Pump Head: 4.76 GPM  Pump Volume At Pump Head: 5.93 GPM  Pump Pressure At Pump Head: 3000 PSI  Pump Pressure At Pump Head: 2500 PSI  Machine Voltage: 230VAC/60Hz/1Ph  Machine Voltage: 230VAC/60Hz/1Ph ...
  • Page 4: Table Of Contents

    The model and serial numbers will be found on a decal attached to the machine. You should record both serial number and date of purchase and keep in a safe place for future reference. Hotsy 1700 Series Manual • Part #97-6419 • Revised 7/06...
  • Page 5: Introduction

    UL approved ground fault circuit interrupter This manual covers the operation and maintenance of (GFCI) power cord. the Hotsy 1700 series washers. All information in this WARNING: Flammable liquids manual is based on the latest product information avail-...
  • Page 6: Pre-Operation Check

    4. Turn the variable pressure control handle clockwise 17. The best insurance against an accident is precaution to increase pressure. and knowledge of the machine. brass soap 18. Hotsy will not be liable for any changes made to nozzle variable pressure our standard machines or any components not Wand (vp) purchased from Hotsy.
  • Page 7 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL component identification high pressure nozzle variable pressure Wand Quick coupler on/off switch hose cou- pler spray discharge nipple trigger detergent injector detergent pick-up tube high pressure hose Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 8: How To Use The Detergent Injector

    3 and 4 to avoid detergent deposit build-up. variable pressure high pressure Quick coupler Wand nozzle pressure control handle soap nozzle on/off switch spray discharge trigger detergent injector nipple high pressure hose Quick coupler detergent pickup tube detergent bucket (not included) Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 9: General Washing Techniques

    Its purpose is to allow recirculation ponents, keep the spray gun open at all times. back into the pump inlet when the trigger on the spray gun is closed. Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 10: Multi-Room Installation

    1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL multi-room installation 280704 (28-280704) kit, hose reel w/bracket 280701 (30-640) Wall mount Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 11: Troubleshooting

    Check and replace if necessary. motor strains Faulty motor Send to nearest Baldor repair center. under load Incorrect spray nozzle Install proper nozzle size (see serial plate for proper (continued on size). neXt paGe) Obstruction in spray nozzle Remove obstruction. Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 12 Faulty on/off switch, pressure switch, Test and replace as needed. Gun triGGer is timer or magnetic contactor pulled machine does not Test power control switch and solid Replace the defective component. turn off after state timer faulty four (4) seconds When spraY Gun is released Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 13: Maintenance

    Attention to regular preventative maintenance procedures will assist in preserving the performance of your equipment. Contact your Hotsy dealer for maintenance. Regular preventative maintenance will add many hours to the life of your pressure washer. Perform maintenance more often under severe conditions.
  • Page 14: Exploded Views

    1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL 1700 series eXploded vieW left side reversed view of electrical panel components auto start option time delay option auto start option 1700 w/time delay option reversed view models 1720, 1730, 1740 time models 1710, 1750 delay shutdown time delay option shutdown option auto start option Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 15: Exploded Views

    1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL 1700 series eXploded vieW riGht side auto start & time delay options 40 41 Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 16: Exploded View Parts List

    (1710) 661355 Elbow, 1/2" JIC x 1/2", 90° 616008 Bracket, Support for Elec Box 661357 Elbow, 1/2" JIC x 3/8" Steel (1710, 876029 Strain Relief, Lq Tit (1710) 1720, 1722, 1723, 1724, 1725, 903086  Locknut, 1/2" Conduit (1710) 1...
  • Page 17 799004 Nozzle, SAqCMEG 0006 Red 612950 Bolt, 5/16" x 1" NC HH (1710) (1720, 1722, 1723, 1724, 1725) 1 646663 Label, Warning, Exposed 799003 Nozzle, SAqCMEG 00055 Red Pulley (1710, 1740, 1742, 1743, 1744,...
  • Page 18: Exploded View Parts List

    612985 Bolt, 3/8" x 1-1/2" NC HH 1710) 876025 Screw, 10/32" x 1/2" Black (1723, 780452 Washer, 5/16" SAE Flat (1710) 4 1724, 1725, 1733, 1734, 1735, 1-96710600 Washer (All except 1710) 1744, 1745, 1754, 1755) 780479 Washer, 5/16" Lock, Split (1710) 4...
  • Page 19: Hose & Spray Gun Assembly

     quick Coupler O-Ring, Large 1 707438 Hose, 3/8" x 50', 1 Wire, Blue w/ Coupler 823988 Clamp, Hose, UNI .46 - .54 961506 Tube, 1/4"x1/2" Clear Vinyl 6 ft.  Not Shown Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 20 2BK57H 5-40505701 25MM 1753 5-10151 5-3314 HC950AR 5-1867 2BK90H 5-40509001 2BK57H 5-40505701 25MM 1754 5-1018 5-3314 HC950AR 5-1867 2BK90H 5-40509001 2BK57H 5-40505701 25MM 1755 5-1018 5-3314 HC950AR 5-1867 2BK90H 5-40509001 2BK57H 5-40505701 25MM Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 21 Bx43 5-604043 6-4018 6-5014 6-02294 6-022970 6-60141 1754 5-512025 H x 1-3/8" 5-511138 Bx43 5-604043 6-4013 6-5013 6-02294 6-022970 6-60101 1755 5-512025 H x 1-3/8" 5-511138 Bx43 5-604043 6-4007 6-5011 6-02295 6-022970 6-60101 Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 22 Snap Ring 70-160228 Manifold Housing 70-021300 Ball Bearing 70-060155 O-Ring Ø1.78 x 15.54 70-000605 Crankshaft See Kits Below Valve Assembly 70-020604 Crankshaft Key 70-060122 O-Ring Ø2.62 x 18.77 70-160012 Oil Dipstick 70-160147 Valve Plug Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 23 **Complete Seal Plunger kit description 15mm Packing 15mm Complete Valve Plunger Oil Seals item numbers 2, 3, 4, 5, 34, 35, 36, 3, 5, 6 11, 12, 13 included 6, 7 37, 38 number of cYlinders kit Will service Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 24 Double-end Crankshft(HC500) 1 827392 Single-end Crankshft(HC501&2) 1 612693 Manifold Stud Bolt 928637 Plunger Rod 780560 Washer 918391 Shaft Protector 915631 Manifold Plug 867751 Bearing Housing 915631 Manifold Plug "O" Ring 867752 Closed-end Bearing Housing Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 25 3 Plunger Seals (926653) 877656 ceramic sleeve kit (20 mm) Consisting of: 1 Plunger Assembly Bolt (612691) 1 Plunger Bolt "O" Ring (926655) 1 Copper Spacer (944779) 1 Copper Spacer (944782) 1 Ceramic Plunger Sleeve (941764) 1 Teflon Ring (926685) Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 26 Plunger Rod 936932 Copper Washer, 1/2" 914138 Connecting Rod 70-160120 Brass Plug, 1/2" 70-180101 Connecting Rod Pin 70-150319 Valve Seat 926691 Connecting Rod Screw 70-150319 Valve Plate 936933 Snap Ring 70-090032 Valve Spring Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 27 7 - 8 - 9 Complete Seal Packing (25 mm) 877652 36 - 37 - 38 - 39 - 40 - 41 Plunger (25 mm) 753069 13 - 14 - 15 Complete Valve 877653 Plunger Oil Seal Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 28 Plug, 1/4 70-080301 Spacer, Yellow 70-110211 Poppet 70-080302 Spacer, Green 70-080307 Spacer, Blue 70-090004 Spring 70-120606 Stem 70-140704 Connector, Outlet 70-000901 O-Ring, Back up 70-060121 O-Ring, Stem 70-160117 Plug, 3/8 70-060306 Washer, 3/8 Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 29: Wiring Diagrams

    1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL 29 Wiring Diagram - Models 1720 and 1722 Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 30 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL Wiring Diagram - Models 1730,1732,1740,1742,1750,1752 Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 31 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL 31 Wiring Diagram - Models 1723,1724,1725,1733,1734,1735,1743,1744,1745,1753,1754,1755 Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 32 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL Wiring Diagram - Models 1720 and 1722 w/Time Delay Shutdown Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 33 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL 33 Wiring Diagram - Models 1730,1732,1740,1742,1750,1752 w/Time Delay Shutdown Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 34 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL Wiring Diagram-Models 1723,1724,1725,1733,1734,1735,1743,1744,1745,1753,1754,1755 w/Time Delay Shutdown Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 35 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL 35 Wiring Diagram - Model 1710 Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 36: Wiring Diagrams

    1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL Wiring Diagram - Model 1720 w/Time Delay Shutdown Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 37 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL 37 Wiring Diagram - Models 1720 and 1722 with Auto Start/Stop Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 38 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL 2. Assemble wand components as shown in figure 3. Wiring Diagram - Model 1710 with Auto Start/Stop Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 39 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL 39 Wiring Diagram - Models 1730, 1732, 1740, 1742, 1750, 1752, with Auto Start/Stop Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 40 1700 SERIES PRESSURE WASHER OPERATOR’S MANUAL Wiring Diagram - Models 1723, 1724, 1725, 1733, 1734, 1735, 1743, 1744, 1745, 1753, 1754, 1755 w/Auto Start/Stop Hotsy 1700 • 97-6419 • Rev. 7/06...
  • Page 42 Hotsy will at its option repair or replace any part covered by this warranty which is defective under normal use for one year at no charge for parts or labor. All defects must be verified by an authorized Hotsy service location.

Table of Contents