Toyota 2005 Corolla Owner's Manual page 188

2. In front of the vehicle, pull up the
auxiliary catch lever and lift
hood.
30
'05 Corolla_U (L/O 0409)
3. Hold the hood open by inserting the
the support rod into the slot.
To insert the support rod into the slot,
move it straight up. If it is moved to the
side or toward the inside of the vehicle,
it may become detached.
Before closing the hood, check to see that
you have not forgotten any tools, rags,
etc. and return the support rod to its
clip—this prevents rattles. Then lower the
hood and make sure it locks into place.
If necessary, press down gently on the
front edge to lock it.
CAUTION
After inserting the support rod into
the slot, make sure the rod supports
the hood securely from falling down
on to your head or body.
NOTICE
Be sure to return the support rod to
its clip before closing the hood. Clos-
ing the hood with the support rod up
could cause the hood to bend.
2005 COROLLA from Sep. '04 Prod. (OM12891U)