Power Windows - Toyota 2005 Corolla Owner's Manual

D
Mode 4—Automatic locking and un-
locking linked with the shift position
and ignition switch
Locking function—All doors are auto-
matically locked when the shift lever is
moved out of the "P" position with the
ignition switch in the "ON" position and
all doors are closed.
Unlocking function—All doors are auto-
matically unlocked when the ignition
switch is turned from the "ON" position
to the "ACC" or "LOCK" position.
CHANGING THE MODE
The mode toggles through from mode
1 to mode 4. To change the mode, do
the following:
1. Set the interior light control dial to the
door position. (See "Interior/instrument
panel light control" on page 95 in Sec-
tion 1- 5.)
2. Shift the shift lever into the "P" posi-
tion and close all doors.
3. Turn the ignition switch to the "ON"
position.
4. Within 5 seconds after the ignition
switch is turned to the "ON" position,
push and hold the power door lock
switch on the front side for about 5
seconds.
'05 Corolla_U (L/O 0409)
5. The interior light will flash to indicate
that the mode has been changed.
The flashing of the interior light indicates
the mode which has been selected.
D
Flashing once, the function
changed to mode 1.
D
Flashing twice, the function
changed to mode 2.
D
Flashing three times, the function has
changed to mode 3.
D
Flashing four times, the function has
changed to mode 4.
If the battery is disconnected or run down,
the mode is changed into initial mode
(mode 1).

Power windows

has
has
The windows can be operated with the
switch on each door.
The power windows work when the ignition
switch is in the "ON" position.
OPERATING THE DRIVER'S WINDOW
Use the switch on the driver's door.
Normal operation: The window moves as
long as you hold the switch.
To open: Lightly push down the switch.
To close: Pull up the switch.
2005 COROLLA from Sep. '04 Prod. (OM12891U)
23