ASSEMBLY INSTRUCTIONS
ELECTRONIC IGNITION: ELECTRODE ASSEMBLY
10
CH
C
Control panel, right side
CF
D
E
CE3
F
CF
DD
CE1
CE1
CE1
TIP: The Electrode Set, main burner (CF)
and the Electrode wire, side burner
(DD), can be found attached to the
control panel (CH) heat shield, as
shown in figure C.
d. Insert the four Electrode set, main
burner (CF) wires into the Electronic
ignition assembly (CE1) as shown in
figure D.
CF
e. Insert the Electrode wire, sear stove
(DD) into the Electronic ignition
assembly (CE1), as shown in figure E.
DD
f. Insert the two Instastart™ ignition
button (CE3) wires into the Electronic
ignition assembly (CE1), as shown in
figure F.
15