Before Update the VCTP Software, it is necessary to install the WRITING TOOLS into the PC.
For the installation of WRITING TOOLS, refer to the "INSTALL FOR WRITING TOOLS".
1.
Unplug the AC cord, and remove the back cabinet.
2.
Short circuit the 1 pin and 2 pin of CP802 on the Main PCB.
3.
Insert the AC cord.
4.
Remove the short circuit 1 pin and 2 pin of CP802 on the Main PCB.
5.
Set the EU LCD MICON VER UP ROM DISC (JG176) to PC.
6.
Start the "VCTP" (Writing Tools).
7.
Select the "LPT Preferences" from File/Preferences menu, then input "5" to the value of "Delay", and press "OK".
NOTE: This step is not necessary from next time.
8.
Using the MICON PROGRAM JIG KIT 25-4 (JG203), connect the PC Terminal and 1~4 pin of CP802 on the
Main PCB (JG203(Red line) =1 pin of CP802).
CP802
Main PCB
UPDATE FOR VCTP SOFTWARE
SH4304
W815
C3228
C3232
W811
C3227
C3231
C801
C-8
CP4305
B3609
C3659
C3638
C3635
D3205
C3639
R3701
C3627
R3704
C3615
D3204
IC3203
C837
C818