Sharp LC-26SA1E Service Manual page 30

LC-26SA1E/RU, LC-32SA1E/RU
5. PAL signal & tuner adjustment
Adjustment point
1 Setting
2 Auto adjustment
performance
6. PAL Signal & Tuner Adjustment (SMPTE RF SIGNAL-Alternative Method)
Adjustment point
1 Setting
2 Auto adjustment
performance
7. ADC adjustment (Component 15K)
Adjustment point
1 Setting
2 Auto adjustment
performance
Adjustment Conditions
[Signal]
PAL
Full Field Color Bar
Composite or RF signal
[Terminal]
EXT3 VIDEO IN
TUNER
Adjustment process
Page3
Adjustment Conditions
[Signal]
PAL
Full Field Color Bar
Composite or RF SMPTE signal
[Terminal]
EXT3 VIDEO IN
TUNER
Adjustment process
Page6
Adjustment Conditions
[Signal]
COMP15K, 50Hz
100% Full Field Colour Bar
[Terminal]
EXT4 COMPONENT IN
Adjustment process
Page4
Adjustment procedure
•Feed the PAL full field colour bar signal (75% colour saturation) to
EXT3 VIDEO IN.
•Feed the RF signal (PAL colour bar) to TUNER.
•Make sure the PAL colour bar pattern has the sync level of 7:3 with
the picture level.
VIDEO IN SIGNAL]
100% white
Bring the cursor on [
[ PAL + TUNER ADJ OK] appears when finished.
Adjustment procedure
•Feed the PAL full field color bar signal (75% color saturation) to EXT3
VIDEO IN
•Feed the RF signal SMPTE color bar (E-12) to TUNER.
•Make sure the SMPTE color bar pattern (E-12) has the sync level of
7:3 with the picture level.
Bring the cursor on [ PAL +TUNER ADJ] and press [OK].
[ PAL+ TUNER ADJ OK] appears when finished.
Adjustment procedure
•Feed the COMPONENT 15K 100% full field colour bar signal (100%
colour saturation) to EXT4 COMPONENT IN.
100% white
Bring the cursor on [
[ COMP15K ADJ OK] appears when finished.
5 – 15
[RF Signal]
100% white
PAL + TUNER ADJ] and press [OK]
COMP15K ADJ] and press [OK]
Black